Click Here

 

 

We've uncovered this article about Hot Water Heater Repair listed below on the internet and accepted it made good sense to relate it with you on this page.

Lots of contemporary homes make use of an electric hot water heater for their furnace, as a result of its comfort as well as simplicity of use. Nonetheless, similar to any other electric appliances, problems may arise with its usage, unexpectedly. It can be truly discouraging to get up to a chilly shower rather than a hot one or having your bath with water that isn't warm adequate or perhaps as well hot. Whatever the case may be, water heater troubles can be fairly nerve-racking. Fortunately, we have actually made a checklist of feasible options to your water heater issues. There are a variety of variables that might trigger a lot of these problems, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for security. Whatever the problem is, getting it dealt with must not position too much of a problem if you comply with these steps:

 

Call An Expert:

If after replacing all faulty components as well as resetting your temperature, the water heater still isn't functioning, you may require to call an expert plumber for a professional viewpoint. The problem with your heating system could be that the hot and cold faucets have been switched or it might be undersized for the amount of hot water required in your home. Whatever the case might be, an expert plumber would assist resolve the trouble.

 

Check Your Power Supply:

As fundamental as this may appear, it is very essential. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the issue, just transform it off and on once more. Replace any type of busted or worn-out fuse. Check the appliance with power after these modifications to see if it's currently working.

 

Check Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't warm enough, you might require to check the temperature setups on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the access panel as well as press the red button for temperature reset over the thermostat. This ought to aid warm the water. Turn the breaker back on and inspect if the trouble has been fixed.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power trouble, then attempt checking out your heating element if it is still functioning. Test each of your heating elements to ensure the problem isn't with any of them. If any one of them is damaged, replace that component and afterwards check whether the hot water is back on.

 

Final thought

Hot water heater problems are not always significant. Many of them are because of small problems like a blown fuse or damaged burner. Replacing the defective components need to do the trick. Nevertheless, if you are still incapable to address the problem, give a call to your closest plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you liked our piece about No Hot Water — Water Heater Repair. Thank you for taking time to browse our blog. Please take the time to promote this entry if you enjoyed reading it. Thanks for going through it.

Contact Us